VG1540080211 DISCOUSE filter assembly

1 、 Product model and applicable models

Common models: 1007781448, 612600081335 PL420, FG98045550080, VG1560080012, etc.

The models used: suitable for many series of heavy trucks, such as Howo, Homan, Shandeka, etc. It can also be adapted to some models of Steyr and Hongyan brands.

2 、 composition

Filter element:

Material: ordinary filter paper, felt, polymer material and fiberglass.

Form: mainly a folded cartridge that can increase the filtration area and improve filtering efficiency.

Shell: usually made of high -strength engineering plastic or metal, with good corrosion resistance, resistance to pressure and impact resistance.

Sealing ring: provides the total tightness of the filter to prevent fuel leakage.

Other parts: may include a water separator, drain valve, etc., some filters are also equipped with pressure sensors and other electronic components used to control the working condition of the filter.

3 、 Technical parameters

Filter accuracy: usually you can reach about 5 microns, can effectively filter small impurities in diesel fuel.

Working temperature: usually can steadily operate in the temperature range from - 40 ℃ to 80 ℃.

Working pressure: working pressure is usually 0.3-0.6 MPa.

The effectiveness of the separation of oil and water: the effectiveness of the separation of oil and water is high, can separate more than 95% of water in diesel fuel.

4, appearance size

The appearance of various models of diesel fuel filters assembled, for example, the model 1007781448 External diameter × height 101 × 214/236.

5 、 product function

Filtering of impurities: it can intercept dust, mechanical particles, gelatin, asphaltes and other diesel fuel impurities to ensure the purity of diesel fuel entering the engine.

Separation of oil and water: thanks to a special structure and materials, it can effectively separate water in diesel fuel, preventing the appearance of rust, wear and other dangers for the engine.

Pressure regulation: maintaining stable pressure in the filter to ensure normal fuel supply in order to avoid abnormal pressure affecting the supply of motor oil or leading to insufficient filtration.

6 、 packaging

It is usually packaged in cardboard or plastic packaging for independent packaging, some products can be packed in wooden boxes and other packaging methods to prevent damage during transportation and storage.

To choose the right Sinotruk fuel filter for your car, you must take into account the following aspects:

Adaptability

Correspondence of the vehicle model: be sure to check the operating manual for the vehicle that clearly indicates the corresponding fuel filter model. You can also directly contact the Sinotruk customer support service to the 4s stores or staff to get accurate information about adaptation. For example, for the Sinotruk Howo TX National VI model, a fuel filter model 1007781448 may be suitable.

Correspondence to engines: different engines make different requirements for fuel filters, so you should choose depending on the model of the engine of the vehicle, its volume, such as fuel (gasoline or diesel fuel), etc. For example, the Sinotruk Man Mc11 engine can be compatible with the knot Fuel filter 201V12501 - 7291.

Performance

The accuracy of the filter: as a rule, the higher the accuracy of the filter, the better the filtration effect, but the filter accuracy can affect fuel consumption too high. Since heavy vehicles and other large -sized vehicles have high intensity of engine operation, it is recommended to choose filters with an accuracy of filtering less than 5 microns, which allow you to effectively filter the smallest fuel impurities.

Stream characteristics: Make sure that the flow rate through the filter corresponds to the needs of the engine in fuel, especially when working with high loads and high speeds. Please read the cost parameters specified in the filter operating manual so that they correspond to the fuel consumption of the vehicle engine.

Dress resistance: pressure in the fuel system of heavy vehicles is relatively high, so you need to choose a filter node with high pressure resistance. As a rule, it is required that it withstand pressure more than 300 kPa to guarantee that it will not be damaged due to excessive pressure during operation.

Quality and materials

Brand and quality: Choose well -known brands and products with a quality guarantee, such as Mann, Bosch, Mahle, etc. Filters of these brands usually take strict quality tests, have stable performance and good filtering properties.

Material: High -quality filter cases are mainly made of high -strength plastic or metal, while filter elements are often made of nanobumags, chemical fiber, ceramics, stainless steel and other materials. Nanofiltration paper has such advantages as high filtration efficiency and low cost; The filtering elements of stainless steel are more durable and resistant to corrosion.

Other aspects

Replacement cycle: Think about whether the cycle of replacement of the filter frequency and the habits of using your car are suitable. If the vehicle is used often, you can choose a filter with a relatively long replacement cycle to reduce the costs and time for maintenance. As a rule, the cycle of replacing the external fuel filter is approximately every 10,000–20,000 kilometers, while the internal filter can vary approximately every 100,000 kilometers.

Price and economic efficiency: based on the need to ensure quality and performance, choose products at prices corresponding to your budget. Do not chase blindly for expensive products and do not choose low -quality filters to save. Consider economic efficiency comprehensively.