Komatsu 708-7W-00140 Hydraulic fan engine assembly

Product representation

1. Introduction

The sets of hydraulic ventilation engines are important components in various industrial applications, providing effective ventilation and cooling. Electric motors 708 - 7W - 001400 are advanced solutions that combine high performance, reliability and durability. In this article, we will present in detail its technical characteristics, advantages, areas of application and comparison with competitors.

2. Technical characteristics

2.1 hydraulic system

The kit is equipped with an advanced hydraulic system. The principle of operation of the hydraulic engine is to convert the energy of fluid pressure (usually hydraulic oil) into the mechanical energy of rotation of the ventilated shaft. This technology allows you to accurately and smoothly adjust the fan rotation speed, which is the key to the effective cooling of the equipment. The system can quickly respond to changes in the environment or load on the equipment, automatically adjusting the fan speed to ensure optimal cooling.

2.2 Power and speed

The 708-7W-001400 set has high power for rapid and efficient rotation of the ventilation shaft. The maximum engine power can reach very large values, providing sufficient strength to rotate large and heavy fans. In addition, the fan speed can be changed in a wide range: from low speeds for economical cooling at low loads to high speeds for aggressive cooling at maximum equipment loads.

2.3. Production materials

Komatsu uses only high-quality materials for the production of the kit 708-7W-00140. Important parts, such as the engine housing and ventilation shaft, are made of special steel or aluminum alloy, which has high strength, corrosion resistance and resistance to high temperatures. This ensures the durability and reliability of the design even in the most severe operating conditions, such as heat, dust and mechanical loads.

3. Advantages

3.1 High performance

The main advantage of the 708-7W-001400 kit is its high performance. It provides a powerful torque, allowing the fans to rotate quickly and effectively even with heavy loads. This, in turn, leads to the rapid cooling of the device, which is necessary for its stable operation. For example, in an excavator, where the engine and other components can secrete a lot of heat during operation, the kit can provide instant cooling, preventing overheating and failure of the equipment.

3.2 High reliability and durability

Thanks to high-quality materials and a reliable design, the set 708-7W-001400 is characterized by a high degree of reliability and durability. It withstands strict operating conditions, such as high temperatures (up to 100-150 degrees Celsius in the device heating zone), dust, moisture and mechanical stress. Unlike some other models that may need frequent replacement due to wear or damage, this kit can last a long time, which reduces the frequency of repairs and the cost of maintenance of equipment.

3.3 energy conservation

The kit also has good energy efficiency. The technology of automatic control of the fan rotation speed allows you to adjust the fan rotation speed in accordance with the actual cooling need. With a low load on the equipment, the fan can rotate at low speed, thereby reducing the energy consumption of the hydraulic system. This not only saves energy, but also reduces the wear of the components of the system, since they work less intensively.

3.4. Service

The set 708 - 7W - 001400 simple and convenient design provides easy access to the components for service. For example, filters of the hydraulic system, requiring regular cleaning or replacement, are located within the mild reach. In addition, due to the high reliability of the design, less frequent maintenance is required than in some other models, which simplifies the operation of equipment and reduces maintenance costs for owners.

4. Examples of application

4.1. In construction equipment

In construction equipment, such as excavators, loaders, dump trucks and road construction machines, a set 708 - 7W - 001400 plays an important role. These machines often work in severe conditions, with high temperatures and a larger load on the engine and other components. The kit provides effective cooling of equipment, preventing overheating and failures, which allows construction equipment to work with maximum performance. For example, on construction sites, where equipment can work without a break for many hours, this kit ensures stable operation of the cooling system, even at high air temperatures and a larger engine load.

4.2. In agricultural machinery

In agricultural machinery, such as tractors, combines and other agricultural vehicles, the set 708 - 7W - 001400 is also used. These machines often work in various climatic conditions, from cold winter days to hot summer months. The kit can ensure reliable operation of the cooling system, even at low temperatures, when the engine can be more inclined to overheating due to lack of sufficient cooling. In addition, in Dusty and contaminated conditions of agricultural work, the design of the kit is resistant to dust and other pollution, which ensures its durability and reliability.

4.3. In the automotive industry

In the automotive industry, especially in heavy trucks and buses, the set 708 - 7W - 001400 can be used for the engine cooling system and other components. These vehicles require an effective cooling system, since the engine operates under a higher load and generates a significant amount of heat. The kit allows you to adjust the fan rotation speed depending on the load on the engine, which ensures optimal cooling and fuel economy. For example, in urban traffic, where the engine is often in variable load mode, the kit can quickly respond to temperature changes and ensure effective engine cooling.

4.4. In the energy sector

In the energy sector, such as power generators that use diesel or gas engines, the set of 708 - 7W - 001400 also plays an important role. These generators should work without a break for a long time, and effective cooling is critical for their stable work. The kit provides reliable operation of the cooling system, preventing the engine overheating and other generator components. This allows energy companies to provide uninterrupted power supply, even in high loads on generators.

Exhibition cabinets

Acquaintance with the plant

The plant operates a team of highly qualified and experienced engineers who continuously introduce technological innovations and improve products. Currently, the company has a number of independent intellectual property rights and patented technologies. The manufactured construction equipment includes a wide range of equipment such as excavators, loaders, taps, bulldozers and other machines. Products are highly productivity, reliability, energy efficiency and environmental friendliness, as well as the ability to adapt to difficult operating conditions in various climatic and working media around the world.

Awards and fightsFixation

frequently asked questions

1. In which countries are we exporting?

Asia: Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.

Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.

South America: Brazil, Chile, Paraguay, Argentina, etc.

Africa: South Africa, Ethiopia, Libya, etc.

2. What kind of payment conditions can we accept?

Usually we can work on T/T, 30% TT before production and 70% TT before shipping

3. What ways can we work for delivery?

1) for most countries in Europe, South America and Africa, etc. We can go along the container or Roro through the ocean freight.

2) for neighboring countries of China, such as Russia, Vietnam, Kazakhstan, Uzbekistan, etc. We can deliver by road or railway.

3) for light spare parts in the urgent requirement, we can send it using the international courier service, such as DHL, TNT, EMS or other air transportation.

4. How can you guarantee that you delivered goods to customers?

A: We will provide you with complete information about delivery for you.

5. What are our advantages compared to other manufacturers/factories?

1) Reliable quality: we carefully choose permanent manufacturers to support spare parts, such as engines, bridges, transmission, and many parts developed and produced by us always adapting the best materials.

2) a competitive price: the concentration of mechanized production in large quantities reduces production costs to ensure a competitive price.

3) The service team: firstly, our sales managers work 24 hours a day, are ready to answer your questions at any time. Secondly, a professional training team with senior equipment, ready to provide support services to users and dealers. Most problems can be solved within 24 hours.

4) Fast delivery: As a rule, we can deliver within 10 working days at the plant after receiving prepayment from customers.

6. How can you provide customers after sales service?

A: We will answer you at first and help you solve problems within 24 hours. If we really need your local, we

We will send your professional person to your settlement to help you solve problems without any fluctuations, supply you with comprehensive