Weichai 612600091086 Parking Solenoid Valve

Product representation

Introduction

In the modern world of automobile and industrial equipment, high -quality and reliable details are the key to effective work and safety. The parking electromagnetic valve 612600091086 from WeICHAI is one of such important components that plays a decisive role in the operation of the engine and the safety of the vehicle. In this article, we will examine in detail the characteristics, principle of work, scope and other aspects of this product.

Review the product

The parking electromagnetic valve 612600091086 is a mechanism developed and produced by WeICHAI, which has a reputation as a reliable and experienced manufacturer of automobile and industrial components. This electromagnetic valve is designed to control the supply of fuel or gas to the engine, as well as to ensure safety during parking and stopping the engine.

Technical characteristics

Model: 612600091086

Manufacturer: Weichai

Type: Parking electromagnetic valve

Voltage: For example, 24V

Current: The maximum current drawn by the valve is usually within a certain range that allows it to operate reliably without overheating or other malfunctions.

Maximum pressure: The valve is capable of operating under conditions of a certain fuel or gas pressure, which can reach several bars.

Compliance with standards: The parking solenoid valve 612600091086 complies with strict quality standards, both domestic and international, which guarantees its reliability and durability.

Operating principle

The electromagnetic valve works on the basis of electrical energy. When an electric current is applied to the electromagnetic device, it creates a magnetic field. This magnetic field acts on a special mechanism inside the valve, setting it in motion.

In the case of a parking electromagnetic valve 612600091086, when the electrical signal is supplied from the vehicle control system (for example, when pressing the parking button or when activating automatic safety systems), the electromagnet magnetic field leads to the movement of the stud or valve plate. This movement allows or blocks the flow of fuel or gas in the engine supply system.

For example, when parking a vehicle, the electromagnetic valve closes the fuel supply channel, which leads to engine stop. When the vehicle is ready for movement again, the electric signal stops, the magnetic field disappears, and the valve returns to its original position, opening the fuel supply channel and allowing the engine to work.

Scope

Automotive: The 612600091086 parking solenoid valve is widely used in various vehicles, including trucks, cars and special equipment. It ensures safe engine stop when parking, and can also be linked to vehicle safety systems such as anti-lock braking system (ABS) and vehicle stabilization system (ESP).

Industrial Equipment: This solenoid valve can also be used in industrial equipment that runs on diesel or gas fuel. For example, in generators, compressors and other machines where precise control of fuel supply and safe engine shutdown are required.

Agricultural Equipment: In agricultural equipment such as tractors, combines and other farm machinery, the 612600091086 Parking Solenoid Valve ensures reliable engine operation and safe stopping when needed.

Advantages

Reliability: Thanks to the use of high-quality materials and precision manufacturing, the 612600091086 solenoid valve has high reliability. It can operate in a wide range of conditions, including variable pressure, temperature and vibration, without losing its functional properties.

Precise control: This electromagnetic valve can precisely control the supply of fuel or gas to the engine. This ensures efficient engine operation, fuel economy and reduced emissions of pollutants into the atmosphere.

Compatibility: The 612600091086 Parking Solenoid Valve is well compatible with various engine models and vehicle control systems. So you can easily replace the old or faulty valve with a new one without having to make any additional modifications.

Safety: Valves play an important role in ensuring the safety of vehicles and the environment. It ensures safe engine shutdown during parking and can also be connected to the vehicle's security system to prevent unwanted situations.

Installation and configuration

The 612600091086 Parking Solenoid Valve must be installed according to the manufacturer's instructions. Typically, the installation process consists of the following steps:

Preparation: Before installation, it is necessary to check the completeness of the valve, the presence of all components and their compliance with the technical characteristics of the vehicle or equipment.

Disassembly: If the old valve needs to be replaced, it should be removed from the fuel or gas system, being careful not to damage other components.

Install the new valve: Install the new solenoid valve in place of the old one, making sure the connection is correctly oriented and is securely tightened. All connections must be tightly secured.

Power Connection: After installation, connect the valve to the vehicle or equipment power system, observing the correct polarity and voltage.

Adjustment: After power is applied, the valve must be adjusted. This may include adjusting the valve timing, adjusting the fuel or gas pressure, and other adjustments depending on the vehicle or equipment specifications.

Maintenance and repair

Regular Maintenance: To ensure the life and reliability of the 612600091086 parking solenoid valve, regular maintenance is required. This includes checking the integrity of connections, cleaning valves from dirt, inspecting electrical contacts and other procedures.

Troubleshooting: If the solenoid valve is not working properly, it is necessary to troubleshoot the problem. This can be done with specialized equipment, such as a multimeter to check electrical parameters, or with diagnostic programs for vehicle control systems.

Repair: If any fault is found, the valve will need to be repaired. This may involve replacing individual components such as the solenoid, studs or o-rings, or if the fault is too severe, replacing the entire valve.

in conclusion

Weichai 612600091086 electromagnetic parking valve is a high -quality and reliable component that plays an important role in the engine and the safety of the vehicle. Its technical characteristics, the principles of work, areas of application and advantages make it one of the best options for automobile, industrial and agricultural equipment. With proper installation, maintenance and repair, this electromagnetic valve can provide long and efficient operation of your vehicle or equipment.

Exhibition cabinets

Acquaintance with the plant

The plant operates a team of highly qualified and experienced engineers who continuously introduce technological innovations and improve products. Currently, the company has a number of independent intellectual property rights and patented technologies. The manufactured construction equipment includes a wide range of equipment such as excavators, loaders, taps, bulldozers and other machines. Products are highly productivity, reliability, energy efficiency and environmental friendliness, as well as the ability to adapt to difficult operating conditions in various climatic and working media around the world.

Awards and fightsfikation

frequently asked questions

1. In which countries are we exporting?

Asia: Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.

Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.

South America: Brazil, Chile, Paraguay, Argentina, etc.

Africa: South Africa, Ethiopia, Libya, etc.

2.What payment terms can we accept?

Usually we can work on T/T, 30%TT before production and 70%TT before shipment

3.What logistics methods can we work with for delivery?

1) For most of Europe, South America and Africa etc. countries, we can go by container or Roro via ocean freight.

2) For China's neighboring countries, such as Russia, Vietnam, Kazakhstan, Uzbekistan, etc., we can deliver by road or railway.

3) For light spare parts in urgent requirement, we can ship it by international courier service, such as DHL, TNT, EMS or other air freight.

4. How can you ensure that you have delivered the goods to customers?

A: We will provide you with full delivery information for you confirmed.

5.What are our advantages compared with other manufacturers/factories?

1) Reliable quality: Carefully select regular manufacturers to support spare parts such as engines, axles, transmissions, and many parts designed and produced by ourselves, always adapting the best materials.

2) Competitive price: Concentration of mechanized production in large quantities reduces production costs to ensure competitive price.

3) Service Team: Firstly, our sales managers are on duty 24 hours a day, ready to answer your questions at any time. Secondly, professional technical service team with senior technicians, ready to provide support services for users and dealers. Most of the problems can be solved within 24 hours.

4) Fast delivery: Generally, we can delivery within 10 working days in factory after receiving the advance payment from customers.

6. How can you provide customers with after-sales service?

A: We will reply to you at the first time and help you solve the problems within 24 hours. If you really need us local, we

We will send your professional person to your locality to help you solve the problems without any hesitation, supply you with all-round