Shantui 06040-06314 Deep Groove Ball Bearing

Product introduction

The radial ball bearing (part number 06040-06314) is a critical support element for rotating components of Shantui heavy-duty equipment, including bulldozers, excavators, and loaders. It is designed to ensure smooth rotation of shafts in engines, hydraulic systems, and transmissions, reducing friction between moving parts and protecting the mechanism from premature wear. This part is specifically designed to withstand extreme radial and axial loads, vibrations, and aggressive external influences (dust, dirt, moisture) typical of intensive use in construction and mining equipment. Unlike non-genuine alternatives, the genuine Shantui 06040-06314 bearing guarantees stable operation, wear protection, and extended service life of the entire undercarriage.

Materials and technical characteristics

The main feature of the Shantui 06040-06314 bearing is the use of high-quality materials and modern manufacturing technologies, which gives it exceptional performance properties:

• Ring and ball material: Made from high-strength GCr15 chromium alloy steel, heat-treated (quenched and tempered). This ensures maximum hardness (up to HRC 62-65), wear resistance, and impact resistance, preventing deformation and cracking under intensive use.

• Application: The radial bearing is designed to accommodate predominantly radial loads, as well as small axial loads in one direction, making it ideal for use in running gear, auxiliary drives and hydraulic mechanisms.

• Cage: Made of high-strength stamped steel or brass, with precision-machined ball pockets. The cage keeps the balls evenly spaced, preventing contact and friction, reducing noise and vibration during operation, and extending bearing life.

• Precision Machining: All bearing surfaces are ground and polished to close tolerances to ensure a perfect fit, minimal clearance, and smooth operation even under maximum loads.

• Technical Parameters:

• Type: Radial Ball Bearing

• Article: 06040-06314

• Manufacturer: Shantui

• Material: Alloy chromium steel GCr15

• Compatibility: Engines, transmissions, hydraulic units of Shantui bulldozers and other special equipment

Each bearing undergoes a multi-stage quality control process at the Shantui factory, including testing for dimensions, hardness, noise, vibration, and wear resistance, which is confirmed by certificates of conformity and original packaging.

Area of ​​Application

Bearing 06040-06314 is designed for installation in the following types of Shantui equipment and components:

1. Bulldozers: Primary application, used in engines, transmissions, hydraulic pumps, blade and ripper drives, withstanding high impact loads during soil handling.

2. Construction and road equipment: Large excavators, loaders, truck cranes and road milling machines equipped with Shantui engines and components.

3. Generator sets: Powerful diesel generators based on Shantui engines, used for permanent and backup power supply.

4. Mining equipment: Quarry dump trucks, drilling rigs and other equipment operating in extreme conditions of high loads and dust.

Thanks to its versatile design, the bearing is suitable for both initial installation on new equipment and for replacing worn parts during maintenance and overhaul, making it popular with both official Shantui dealers and independent service centers.

Functional purpose

The main function of the Shantui 06040-06314 radial ball bearing is to provide reliable support for rotating shafts and reduce friction between moving parts of the mechanism, performing the following critical tasks:

1. Reduced friction and wear: Creates ideal rolling between the shaft and housing, minimizing sliding friction, preventing scuffing, wear and breakage of shafts and components, extending the service life of the entire equipment.

2. Radial Load Absorption: Effectively absorbs radial loads generated during earthmoving, vehicle movement, and loading/unloading operations, thereby protecting the assembly housing from deformation and cracking.

3. Ensuring rotational accuracy: The precision design ensures minimal radial and axial clearance, ensuring high shaft rotational accuracy, which is critical for the operation of hydraulic pumps, gearboxes and other high-precision mechanisms.

4. Reduced Noise and Vibration: Polished balls and a high-quality cage provide smooth operation, reducing noise and vibration in the mechanism, improving operator comfort and extending component life.

5. Contamination Protection: The standard open design uses protective covers or seals in the assemblies to prevent dust, dirt and moisture from entering the rolling area, protecting the bearing from corrosion and premature wear.

Proper bearing operation directly impacts the reliability and service life of all equipment: wear and tear leads to increased noise, vibration, shaft seizure, and catastrophic component failure, which can lead to equipment downtime and costly repairs.

Advantages over non-original analogues

Many customers choose non-original bearings 06040-06314 due to their lower price, but these parts have a number of significant disadvantages compared to the original Shantui product:

1. Low-quality materials: Non-genuine bearings often use low-quality steel without the necessary heat treatment, which leads to rapid wear, deformation of the rolling races, and failure after just a few months of use.

2. Geometry inaccuracy: Analogues often have deviations in size and shape, which leads to uneven load distribution, local overheating and rapid wear of components.

3. Insufficient hardness: Without deep hardening, the working surfaces quickly wear out, which leads to scoring and axle breakage.

4. No warranty: Non-original replacements do not have an official manufacturer's warranty, and if they fail, the user is responsible for all chassis repair costs. The original 06040-06314 bearing comes with a Shantui warranty, confirming its quality and reliability.

5. Short service life: Non-original bearings often fail after just a few months of intensive use, while original parts retain their properties throughout the entire service life of the unit and equipment.

Installation and maintenance

Shantui 06040-06314 bearing installation must be performed by a qualified technician in accordance with all Shantui repair instructions. Incorrect installation is the leading cause of bearing failure, so the following steps are recommended:

1. Preparation for installation:

• Thoroughly clean the shaft and seat in the housing from dirt, rust and old lubricant residues, using special cleaning agents.

• Inspect the axle and seat for wear, scoring, and out-of-roundness. If necessary, restore the surface or replace worn parts.

• Inspect the new bearing for defects, scratches or damage to the raceways and balls.

• Lubricate the bearing and seat with a high quality lubricant recommended by Shantui for this type of assembly.

• Use a special press to install the bearing onto the shaft and into the housing to avoid distortion and damage. Never use impact tools (such as hammers) to avoid deforming the rings or damaging the balls.

• Make sure that the bearing is installed all the way, without play or distortion, and ensures easy rotation of the shaft.

• If necessary, install retaining rings, covers and seals to protect against contamination.

• Check the ease of rotation of the shaft in the bearing, without jamming, jerking or extraneous noise.

• After assembling the unit, perform a test run of the equipment, checking the smooth operation of the working equipment and the absence of extraneous noise in the area of ​​the unit.

To extend the service life of bearings, it is recommended to regularly check the condition of the lubricant, replace it and service the components in a timely manner, avoid overloading the equipment, and comply with Shantui's maintenance regulations.

Conclusion

The Shantui 06040-06314 deep groove ball bearing is a critical component, ensuring reliable operation of rotating components in Shantui heavy-duty equipment under the harshest operating conditions. Manufactured from high-quality materials in compliance with all Shantui OEM standards, this genuine bearing guarantees stable operation, wear protection, and a long service life.

Using non-genuine replacement bearings instead of the 06040-06314 bearing leads to rapid wear, component failure, and costly repairs, while the original Shantui product is an investment in equipment safety and reliability. For companies operating Shantui heavy-duty equipment, choosing the original 06040-06314 radial bearing is a guarantee of quality, safety, and minimal maintenance costs.

Exhibition cabinets

Getting to know the plant

The plant employs a team of highly qualified and experienced engineers who continuously innovate and improve its products. The company currently holds a number of independent intellectual property rights and patented technologies. Its construction equipment includes a wide range of excavators, loaders, cranes, bulldozers, and other machines. These products are distinguished by their high productivity, reliability, energy efficiency, and environmental friendliness, as well as the ability to adapt to challenging operating conditions in a variety of climates and environments worldwide.

Awards and qualificationsfication

frequently asked questions

1. Which countries do we export to?

Asia: Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.

Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.

South America: Brazil, Chile, Paraguay, Argentina, etc.

Africa: South Africa, Ethiopia, Libya, etc.

2.What payment terms can we accept?

Usually we can work on T/T, 30% TT before production and 70% TT before shipment

3.What logistics methods can we use for delivery?

1) For most of Europe, South America and Africa etc. countries, we can go by container or Roro via ocean freight.

2) For China's neighboring countries, such as Russia, Vietnam, Kazakhstan, Uzbekistan, etc., we can deliver by road or rail.

3) For light spare parts in urgent requirement, we can ship it by international courier service, such as DHL, TNT, EMS or other air freight.

4. How can you guarantee that you have delivered the goods to customers?

A: We will provide you with full delivery information for you confirmed.

5.What are our advantages compared with other manufacturers/factories?

1) Reliable quality: Carefully select reliable manufacturers to support spare parts such as engines, axles, transmissions, and many parts designed and produced by ourselves, always adopting the best materials.

2) Competitive price: Concentration of mechanized production in large quantities reduces production costs to ensure competitive price.

3) Service Team: Firstly, our sales managers are available 24/7, ready to answer your questions at any time. Secondly, our professional technical support team, with senior technicians, is ready to provide support to users and dealers. Most issues can be resolved within 24 hours.

4) Fast delivery: Generally, we can delivery within 10 working days in factory after receiving the advance payment from customers.

6. How can you provide after-sales service to customers?

A: We will reply you at the first time and help you solve the problems within 24 hours. If we really need your local, we

We will send your professional person to your locality to help you solve the problems without any hesitation, supply you with all-round