Shantui 06040-06313 Deep Groove Ball Bearing

Product Introduction

The deep groove ball bearing (part number 06040-06313) is a critical component of the transmission, engine, and auxiliary systems of Shantui heavy equipment (including bulldozers, loaders, and excavators). It is designed to support radial and axial loads, ensure smooth shaft rotation, and reduce friction between moving parts, which directly impacts the reliability and service life of the entire equipment. This part is specifically designed to operate under extreme loads, vibration, dust, and temperature fluctuations typical of the construction, mining, and road construction industries. Unlike non-genuine alternatives, the genuine Shantui 06040-06313 bearing guarantees stable component operation, extended equipment life, and reduced risk of costly failures.

Materials and technical characteristics

The main feature of the Shantui 06040-06313 bearing is the use of high-quality materials and modern manufacturing technologies, which gives it exceptional performance properties:

• Bearing rings (inner and outer): Made of high-strength chromium alloy steel (GCr15), with subsequent deep heat treatment (hardening and tempering) and precision ground raceways. This ensures high hardness, wear resistance, and impact resistance, preventing deformation and cracking under intensive use.

• Balls: High-precision balls made from the same alloy steel, with a perfect spherical shape and a mirror-polished surface, which guarantees minimal friction and uniform load distribution across the entire rolling raceway.

• Cage: Made of high-strength stamped steel with precision-machined ball pockets, the cage keeps the balls evenly spaced, preventing contact and friction, reducing noise and vibration during operation, and extending bearing life.

• Lubrication and Design: This open-type bearing is designed for installation in units with external lubrication systems or is filled with high-quality, high-temperature grease for life. The design ensures efficient operation over a wide temperature range from -40°C to 120°C.

• Technical Parameters:

• Type: Deep Groove Ball Bearing

• Article: 06040-06313

• Manufacturer: Shantui

• Status: Original OEM part

• Material: Alloy chromium steel GCr15

• Design: Open type

• Compatibility: Engines, transmissions, hydraulic pumps, gearboxes for Shantui bulldozers and other special equipment

Each bearing undergoes multi-stage quality control at the Shantui factory, including testing for dimensions, hardness, noise, vibration, and wear resistance, which is confirmed by certificates of conformity.

Scope of application

Bearing 06040-06313 is designed for installation in the following types of Shantui equipment and components:

1. Bulldozers: Primary applications, used in engines, transmissions, hydraulic pumps, blade and ripper drives, withstanding high shock loads when working with soil.

2. Other construction equipment: Loaders, excavators, truck cranes, road milling machines equipped with Shantui engines and components.

3. Internal combustion engines: Diesel engines of special equipment, installed in auxiliary drives (generator, water pump, air conditioning compressor).

4. Mining equipment: Quarry dump trucks, drilling rigs and other equipment operating in extreme conditions of high loads and dust.

Thanks to its versatile design, the bearing is suitable for both initial installation on new equipment and for replacing worn parts during maintenance and overhaul, making it popular with both official Shantui dealers and independent service centers.

Functional purpose

The main function of the Shantui 06040-06313 deep groove ball bearing is to provide reliable support for rotating shafts and reduce friction between moving parts of the mechanism, performing the following critical tasks:

1. Reduced friction and wear: Creates smooth rolling between the shaft and housing, minimizing sliding friction, preventing scuffing, wear and breakage of shafts and components, extending the service life of the entire equipment.

2. Load absorption: Effectively absorbs radial (perpendicular to the shaft) and axial (along the shaft) loads, ensuring stable operation of the unit under any operating conditions, including impact loads during bulldozer operation.

3. Ensuring rotational accuracy: The precision design ensures minimal radial and axial clearance, ensuring high shaft rotational accuracy, which is critical for the operation of hydraulic pumps, gearboxes and other high-precision mechanisms.

4. Reduced Noise and Vibration: The cage and polished balls provide smooth operation, reducing noise and vibration in the mechanism, improving operator comfort and extending the service life of the components.

5. Corrosion Protection: High-quality steel and grease protect bearing parts from corrosion, preventing failure when operating in wet and aggressive environments.

The correct operation of bearings directly affects the reliability and service life of all equipment: their wear leads to increased noise, vibration, jamming of shafts and catastrophic failure of components, which can lead to equipment downtime and expensive repairs.

Advantages over non-original analogues

Many customers choose non-original analogs of 06040-06313 bearings due to their lower price, but such parts have a number of significant disadvantages compared to the original Shantui product:

1. Low-quality materials: Non-genuine bearings often use low-quality steel without the necessary heat treatment, which leads to rapid wear, deformation of the rolling races, and failure after just a few months of use.

2. Geometry inaccuracy: Analogues often have deviations in the size and shape of the balls and rolling raceways, which leads to uneven load distribution, increased friction, noise and vibration, as well as rapid wear of components.

3. Poor quality cages: Non-original cages often deform under load, resulting in ball jamming and bearing failure, as well as damage to the shaft and housing of the unit.

4. No warranty: Non-original equivalents do not have an official manufacturer's warranty, and if they fail, all repair costs for components and equipment are borne by the user. The original 06040-06313 bearing comes with a Shantui warranty, confirming its quality and reliability.

5. Short service life: Non-original bearings often fail after just 1-2 years of use, while original parts retain their properties throughout the entire service life of the unit and equipment.

Installation and maintenance

Shantui 06040-06313 bearing installation must be performed by a qualified technician in accordance with all Shantui repair instructions. Incorrect installation is the leading cause of bearing failure, so the following steps are recommended:

1. Preparation for installation:

• Thoroughly clean the shaft and seat in the housing from dirt, rust and remnants of old grease, using special cleaning agents.

• Inspect the shaft and housing for wear, scoring, and out-of-roundness. If necessary, restore the surface or replace worn parts.

• Inspect the new bearing for defects, scratches or damage to the raceways and balls.

• Lubricate the bearing, shaft and seat with a high-quality grease recommended by Shantui for this type of assembly.

• Use a special press to install the bearing onto the shaft and into the housing to avoid distortion and damage. Never use impact tools (such as hammers) to avoid deforming the rings or damaging the balls.

• Make sure that the bearing is installed all the way, without distortion, and ensures easy rotation of the shaft.

• If necessary, install retaining rings, covers and seals to protect against contamination.

• Check the ease of rotation of the shaft in the bearing, without jamming, jerking or extraneous noise.

• Check the axial and radial clearance to ensure it meets Shantui specifications.

• After assembling the unit, perform a test run of the equipment, checking for the absence of extraneous noise, vibrations, and overheating of the unit.

To extend the service life of bearings, it is recommended to regularly check the condition of the lubricant, replace it and service the components in a timely manner, avoid overloading the equipment, and comply with Shantui's maintenance regulations.

Conclusion

The Shantui 06040-06313 deep groove ball bearing is a versatile and critical component that ensures reliable operation of rotating components in Shantui heavy-duty equipment under the harshest operating conditions. Manufactured from high-quality materials in compliance with all Shantui OEM standards, this genuine bearing guarantees stable operation, wear protection, and a long service life.

Using non-genuine bearings instead of the 06040-06313 bearing leads to rapid wear, component failure, and costly repairs, whereas the original Shantui product is an investment in the reliability and durability of the equipment. For businesses operating Shantui equipment, choosing the original 06040-06313 bearing is a guarantee of quality, safety, and minimal maintenance costs.

Exhibition cabinets

Getting to know the plant

The plant employs a team of highly qualified and experienced engineers who continuously innovate and improve its products. The company currently holds a number of independent intellectual property rights and patented technologies. Its construction equipment includes a wide range of excavators, loaders, cranes, bulldozers, and other machines. These products are distinguished by their high productivity, reliability, energy efficiency, and environmental friendliness, as well as the ability to adapt to challenging operating conditions in a variety of climates and environments worldwide.

Awards and qualificationsfication

frequently asked questions

1. Which countries do we export to?

Asia: Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.

Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.

South America: Brazil, Chile, Paraguay, Argentina, etc.

Africa: South Africa, Ethiopia, Libya, etc. 

2.What payment terms can we accept?

Typically, we work on T/T terms: 30% T/T before production and 70% T/T before shipment.

3.What logistics methods can we work for delivery?

1) For most of Europe, South America and Africa etc. countries, we can go by container or Roro via ocean freight.

2) For China's neighboring countries, such as Russia, Vietnam, Kazakhstan, Uzbekistan, etc., we can deliver by road or rail.

3) For light spare parts in urgent requirement, we can ship it by international courier service, such as DHL, TNT, EMS or other air freight.

4. How can you guarantee that you have delivered the goods to customers?

A: We will provide you with full delivery information for you confirmed.

5.What are our advantages compared with other manufacturers/factories?

1) Reliable quality: Carefully select reliable manufacturers to support spare parts such as engines, axles, transmissions, and many parts designed and produced by ourselves, always adopting the best materials.

2) Competitive price: Concentration of mechanized production in large quantities reduces production costs to ensure competitive price.

3) Service Team: Firstly, our sales managers are available 24/7, ready to answer your questions at any time. Secondly, our professional technical support team, with senior technicians, is ready to provide support to users and dealers. Most issues can be resolved within 24 hours.

4) Fast delivery: Generally, we can delivery within 10 working days in factory after receiving the advance payment from customers.

6. How can you provide after-sales service to customers?

A: We will reply you at the first time and help you solve the problems within 24 hours. If we really need your local, we

We will send your professional person to your locality to help you solve the problems without any hesitation, supply you with all-round