Shantui 16Y-15-00080 Support bracket bearing

Product Introduction

The genuine bearing, part number 16Y-15-00080, is a key component in the undercarriage of the Shantui SD16 heavy-duty bulldozer. It is designed for installation in the support bracket (bearing assembly), ensuring smooth and reliable rotation of the articulated joints of the working equipment (blade, ripper) and the transmission. This part is specifically designed to withstand extreme shock loads, vibrations, and aggressive external influences (dust, dirt, moisture) typical of intensive use in construction and mining equipment. Unlike non-genuine alternatives, the genuine Shantui 16Y-15-00080 bearing guarantees stable operation, wear protection, and extended service life of the entire undercarriage.

Materials and technical characteristics

The main feature of the Shantui 16Y-15-00080 bearing is the use of high-quality materials and modern manufacturing technologies, which gives it exceptional performance properties:

• Housing and working parts material: Made of high-strength chromium alloy steel (GCr15) with subsequent heat treatment (hardening and tempering). This ensures maximum hardness (up to HRC 62-65), wear resistance, and impact resistance, preventing deformation and cracking under intensive use.

• Anti-friction coating: The working surface is coated with a high-quality anti-friction coating, which reduces the coefficient of friction between the bearing and the axle, ensuring smooth rotation even under maximum loads.

• Precision machining: All bearing dimensions and shapes are precision ground to tight tolerances, ensuring a perfect fit and zero play during operation.

• Technical Parameters:

• Type: Bearing bracket

• Article: 16Y-15-00080

• Brand: Shantui (山推)

• Application: Undercarriage, hinges of working equipment of SD16 bulldozers

• Material: GCr15 Alloy Steel

• Operating temperature: -40°C to 120°C

• Load type: Withstands high radial and axial loads

Each bearing undergoes multi-stage quality control at the Shantui factory, including testing for hardness, wear resistance, dimensional accuracy, and strength, which is confirmed by certificates of conformity and original packaging.

Area of ​​Application

Bearing 16Y-15-00080 is designed for installation in the following Shantui equipment units:

1. Shantui SD16 Bulldozers: Main application, used in the articulated joints of the blade, ripper and undercarriage, providing reliable support and flexible movement during soil development and loading and unloading operations.

2. Other construction equipment: Excavators, loaders and other Shantui special equipment with similar chassis parameters.

3. Road construction equipment: Rollers, milling machines and road rollers operating under heavy load conditions.

Thanks to its versatile design, the bearing is suitable for both initial installation on new equipment and for replacing worn parts during major repairs, making it popular with both official Shantui dealers and independent service centers.

Functional purpose

The primary function of the Shantui 16Y-15-00080 bearing is to provide reliable support and smooth rotation of the undercarriage and work equipment pivot points, performing the following critical tasks:

1. Reduced Friction and Wear: Creates perfect rolling motion between the axle and housing, minimizing sliding friction and preventing scuffing, wear and breakage of axles and bearing seats.

2. Load absorption: Effectively distributes high impact loads from the working equipment (blade, ripper) and the chassis over the entire bearing surface, protecting the unit housing from deformation and cracks.

3. Wear compensation: Precision clearance and high-quality materials compensate for natural wear of parts during operation, maintaining the geometry of the unit for a long time.

4. Vibration Dampening: The bearing design softens vibrations and shocks that occur when working on hard ground, reducing noise levels and protecting other engine and transmission components from premature wear.

5. Protection from external influences: The corrosion- and damage-resistant housing prevents dust, dirt, and moisture from entering the rolling zone, which is critical for operation on construction sites.

Proper bearing operation directly impacts the controllability, reliability, and safety of equipment operation: bearing wear leads to increased play in components, loss of control over the equipment, and the risk of catastrophic failure of the chassis.

Advantages over non-original analogues

Many customers choose non-original analogs of 16Y-15-00080 bearings due to their lower price, but these parts have a number of significant disadvantages compared to the original Shantui product:

1. Low-quality materials: Non-genuine bearings often use low-quality steel without the necessary heat treatment, which leads to rapid wear, deformation of the rolling races, and failure after just a few months of use.

2. Geometry inaccuracy: Analogues often have deviations in size and shape, which leads to uneven load distribution, local overheating and rapid wear of components.

3. Insufficient hardness: Without deep hardening, the working surfaces quickly wear out, which leads to scoring and axle breakage.

4. No warranty: Non-original replacements do not have an official manufacturer's warranty, and if they fail, the user is responsible for all chassis repair costs. The original 16Y-15-00080 bearing comes with a Shantui warranty, confirming its quality and reliability.

5. Short service life: Non-original bearings often fail after just a few months of intensive use, while original parts retain their properties throughout the entire service life of the unit (up to 10,000+ hours of operation).

Installation and maintenance

Shantui 16Y-15-00080 bearing installation must be performed by a qualified technician in accordance with all Shantui repair instructions. Incorrect installation is the primary cause of bearing failure, so the following steps are recommended:

1. Preparation for installation:

• Thoroughly clean the axle and the seat in the unit housing from dirt, rust and remnants of old grease, using special cleaning agents.

• Inspect the axle and seat for wear, scoring, and out-of-roundness. If necessary, restore the surface or replace worn parts.

• Inspect the new bearing for defects, scratches or damage.

• Lubricate the bearing and seat with a high-quality grease recommended by Shantui for this type of unit.

• Use a special press to install the bearing into the housing to avoid distortion and damage. Never use impact tools (such as hammers) to avoid deforming the rings or damaging the working surfaces.

• Make sure that the bearing is installed all the way, without any play or distortion.

• If necessary, install retaining rings, covers and seals to protect against contamination.

• Check the ease of rotation of the axle in the bearing, without jamming, jerking or extraneous noise.

• After assembling the unit, perform a test run of the equipment, checking the smooth operation of the working equipment and the absence of extraneous noise in the area of ​​the unit.

To extend the service life of bearings, it is recommended to regularly check the condition of the lubricant, promptly replace it and maintain components, avoid overloading equipment and follow Shantui maintenance regulations.

Conclusion

The Shantui 16Y-15-00080 bearing is a critical component of the SD16 heavy-duty bulldozer's undercarriage, ensuring reliable and smooth operation in the harshest operating conditions. Manufactured from high-quality materials in compliance with all Shantui OEM standards, this genuine bearing guarantees stable operation, wear protection, and a long service life.

Using non-genuine replacement bearings instead of the 16Y-15-00080 bearing leads to rapid wear of the undercarriage, loss of control, and costly repairs. A genuine Shantui product is an investment in safety and reliability. For companies operating Shantui heavy-duty equipment, choosing the genuine 16Y-15-00080 bearing is a guarantee of quality, safety, and minimal maintenance costs.

Exhibition cabinets

Getting to know the plant

The plant employs a team of highly qualified and experienced engineers who continuously innovate and improve its products. The company currently holds a number of independent intellectual property rights and patented technologies. Its construction equipment includes a wide range of excavators, loaders, cranes, bulldozers, and other machines. These products are distinguished by their high productivity, reliability, energy efficiency, and environmental friendliness, as well as the ability to adapt to challenging operating conditions in a variety of climates and environments worldwide.

Awards and qualificationsfication

frequently asked questions

1. Which countries do we export to?

Asia: Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.

Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.

South America: Brazil, Chile, Paraguay, Argentina, etc.

Africa: South Africa, Ethiopia, Libya, etc.

2.What payment terms can we accept?

Usually we can work on T/T, 30% TT before production and 70% TT before shipment

3.What logistics methods can we use for delivery?

1) For most of Europe, South America and Africa etc. countries, we can go by container or Roro via ocean freight.

2) For China's neighboring countries, such as Russia, Vietnam, Kazakhstan, Uzbekistan, etc., we can deliver by road or rail.

3) For light spare parts in urgent requirement, we can ship it by international courier service, such as DHL, TNT, EMS or other air freight.

4. How can you guarantee that you have delivered the goods to customers?

A: We will provide you with full delivery information for you confirmed.

5.What are our advantages compared with other manufacturers/factories?

1) Reliable Quality: We carefully select long-term manufacturing partners to supply spare parts—such as engines, axles, and transmissions—and for the many components we design and manufacture ourselves, we consistently utilize the finest materials.

2) Competitive price: Concentration of mechanized production in large quantities reduces production costs to ensure competitive price.

3) Service Team: Firstly, our sales managers are available 24/7, ready to answer your questions at any time. Secondly, our professional technical support team, with senior technicians, is ready to provide support to users and dealers. Most issues can be resolved within 24 hours.

4) Fast delivery: Generally, we can delivery within 10 working days in factory after receiving the advance payment from customers.

6. How can you provide after-sales service to customers?

A: We will reply you at the first time and help you solve the problems within 24 hours. If we really need your local, we

We will send your professional person to your locality to help you solve the problems without any hesitation, supply you with all-round