Shantui 07000-62018 O-ring gasket
1. High tightness: The material is non-asbestos composite, withstands high pressure and temperature.
2.Precise OEM Geometry: Fully matched to Shantui specifications, perfect fit without any adjustments.
3. Durability in aggressive environments: Resistant to oils, hydraulics and vibrations, retains its shape for a long time.
Product introduction
Gasket 175-13-23231 is a genuine sealing component from Shantui, a heavy equipment manufacturer, designed specifically for SD16 series bulldozers and other heavy-duty construction and mining equipment. Unlike generic alternatives, this gasket is specifically designed for use under extreme loads, constant vibration, temperature fluctuations, and exposure to aggressive environments, making it an indispensable component for maintaining the machine's performance, safety, and longevity.
Materials and technical features
The key feature of the original Shantui 175-13-23231 gasket is the selection of high-quality, non-asbestos composite material and precision manufacturing. It is manufactured using a modern reinforced composite based on synthetic fibers and a rubber binder, which has undergone multi-stage heat treatment and quality control. This material offers a unique combination of performance properties adapted to the operating conditions of heavy-duty equipment:
High compression resistance and recovery: The gasket retains its elasticity and sealing ability even after prolonged compression between flanges, compensating for thermal expansion, vibration and minor deformations of parts without loss of tightness.
Wide temperature range: The material works effectively in conditions from -40 °C to +150 °C, which allows the gasket to be used in any climate zone, from northern regions with extreme frosts to hot desert conditions, where the temperature of the surfaces of components can reach high values.
Chemical Resistance: The gasket will not swell, decompose or degrade when exposed to engine oils, hydraulic fluids, diesel fuel, coolants and most aggressive chemical environments, which is critical for operation in lubrication, hydraulic and fuel systems.
Mechanical strength and tear resistance: The reinforced structure of the material provides high tensile strength and resistance to mechanical damage, which prevents ruptures and leaks under intensive use and impact loads.
Low residual deformation: The material does not shrink or lose its thickness after long-term use, which guarantees stable tightness throughout the entire service life of the unit.
Every part undergoes strict dimensional and geometric inspection at the Shantui factory: the gasket shape, mounting bolt hole placement, and material thickness are all precisely matched to the original drawings with minimal tolerances, guaranteeing a perfect fit and a tight seal against the flange surfaces without the need for additional adjustment or machining. Part number 175-13-23231 is stamped on the side of the gasket, confirming its authenticity and compliance with the manufacturer's specifications.
Scope of application
Gasket 175-13-23231 is a specialized sealing component designed for installation in high-load systems of Shantui equipment:
Hydraulic systems: This is the primary application—sealing connections in hydraulic pumps, distributors, hydraulic cylinders, and hydraulic unit housings. In these components, the gasket prevents hydraulic fluid leakage under high pressure, which is critical for the stable operation of the working equipment (blade, ripper, SD16 bulldozer).
Engine Lubrication System: Sealing the joints in the cylinder block, oil pan, oil pump and filters, preventing engine oil leakage and dirt from entering the engine.
Cooling System: Sealing the connections of the water pump, thermostat, thermostat housing and other components, protecting against coolant leakage and engine overheating.
Transmission and Gearbox: Sealing the housings of the gearbox, differential and other components, preventing transmission oil leakage.
Intake and Exhaust Systems: Sealing manifold joints where resistance to high exhaust temperatures is required.
This spare part is used both in the factory assembly of new equipment and during scheduled and major repairs, replacing worn gaskets to restore the tightness of components and prevent leaks.
Functional purpose
The primary, but not the only, function of the 175-13-23231 gasket is to ensure a completely sealed connection between two flanged components. However, its role in the operation of the equipment is much broader:
Leak Prevention: Creates a reliable barrier seal that keeps hydraulic fluid, oil or fuel inside the system, preventing loss and loss of operating efficiency.
Protection from external contaminants: Prevents dust, dirt, moisture and abrasive particles from entering the unit, which protects parts from corrosion, abrasive wear and premature failure.
Compensation for deformations and vibrations: Thanks to high elasticity and compression resistance, the gasket compensates for thermal expansion and contraction of parts during operation, and also dampens vibrations, maintaining a tight seal even under intense impact loads typical of bulldozer operation with soil.
Reduced wear on adjacent parts: The seal prevents metal-to-metal contact between flange surfaces, reducing friction and wear, extending the life of housings, shafts and other components.
Ensuring operational safety: Prevents the leakage of hot oil, hydraulic fluid or fuel, which reduces the risk of fire, operator injury and failure of expensive equipment components.
System pressure stabilization: Maintains stable pressure in hydraulic and fuel systems, which ensures proper operation of mechanisms and prevents malfunctions in the control of working equipment.
Advantages over non-original analogues
Many equipment owners choose non-original gaskets due to their low price, but these parts have significant drawbacks that lead to high risks and additional costs:
Dimensional and geometric inaccuracies: Similar products often have deviations in shape, hole placement, and material thickness, leading to improper fit, distortion, and leaks after only a short period of use. The original Shantui 175-13-23231 gasket fully complies with specifications, guaranteeing a perfect fit without adjustment.
Low quality material: Non-original seals often use cheap rubber or asbestos-containing materials without special additives, which quickly crack, lose elasticity and break down when in contact with oils and high temperatures. The original Shantui material is designed specifically for the operating conditions of special equipment, providing a long service life.
Lack of quality control: Comparable parts do not undergo multi-stage factory testing, which often leads to hidden defects and unexpected leaks. Genuine Shantui parts come with quality certificates and an official warranty.
High risk of costly repairs: A hydraulic fluid or oil leak due to a non-original gasket can lead to failure of the hydraulic pump, engine, or other expensive components, the repair cost of which is hundreds of times higher than the price of the original gasket.
Non-compliance with environmental standards: Many non-genuine gaskets contain asbestos, which is hazardous to operator health and the environment, while genuine Shantui gasket is made of safe, non-asbestos material.
Installation and maintenance
Correct installation of the 175-13-23231 gasket directly affects its service life and tightness, so it is recommended to follow these steps:
Mounting preparation: Thoroughly clean the flange surfaces of any dirt, rust, old grease, and old gaskets. Inspect the surfaces for burrs, scratches, or deformations that could damage the new gasket.
Gasket Check: Before installation, inspect the gasket for tears, scratches, deformations, or other damage. Do not use damaged parts, as this will cause leaks.
Installation: Carefully place the gasket on the mounting surface, making sure that the bolt holes are aligned and there are no distortions.
Tightening the mounting bolts: Tighten the bolts evenly, in a crisscross pattern, to the torque recommended in the Shantui repair manual. Do not overtighten the bolts to avoid deforming the gasket or damaging the flanges.
Leak test: After assembling the unit, start the equipment and check the connection for fluid leaks, making sure it is completely tight.
To extend the service life of the gasket, it is recommended to regularly check its condition during scheduled maintenance, promptly replace worn parts, and use only genuine Shantui spare parts.
Conclusion
The Shantui 175-13-23231 gasket is a small but critical component that ensures the smooth operation of all heavy-duty equipment. Choosing a genuine part guarantees absolute tightness, protection against leaks and costly repairs, and an extended service life for the entire machine. For companies operating Shantui equipment, using genuine gaskets is an investment in reliability, safety, and a reduction in overall operating costs.
Exhibition cabinets
Getting to know the plant
The plant employs a team of highly qualified and experienced engineers who continuously implement technological innovations and improve its products. The company currently holds a number of independent intellectual property rights and patented technologies. Its construction equipment includes a wide range of excavators, loaders, cranes, bulldozers, and other machines. These products are distinguished by their high productivity, reliability, energy efficiency, and environmental friendliness, as well as the ability to adapt to challenging operating conditions in a variety of climates and work environments worldwide.
Awards and qualificationsfication
frequently asked questions
1. Which countries do we export to?
Asia: Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.
Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.
South America: Brazil, Chile, Paraguay, Argentina, etc.
Africa: South Africa, Ethiopia, Libya, etc.
2.What payment terms can we accept?
Usually we can work on T/T, 30% TT before production and 70% TT before shipment
3.What logistics methods can we use for delivery?
1) For most of Europe, South America and Africa etc. countries, we can go by container or Roro via ocean freight.
2) For China's neighboring countries, such as Russia, Vietnam, Kazakhstan, Uzbekistan, etc., we can deliver by road or rail.
3) For light spare parts in urgent requirement, we can ship it by international courier service, such as DHL, TNT, EMS or other air freight.
4. How can you guarantee that you have delivered the goods to customers?
A: We will provide you with full delivery information for you confirmed.
5.What are our advantages compared with other manufacturers/factories?
1) Reliable quality: Carefully select reliable manufacturers to support spare parts such as engines, axles, transmissions, and many parts designed and produced by ourselves, always adopting the best materials.
2) Competitive price: Concentration of mechanized production in large quantities reduces production costs to ensure competitive price.
3) Service Team: Our sales managers are available 24/7, ready to answer your questions at any time. Our professional technical support team, with senior technicians, is ready to provide support to users and dealers. Most issues can be resolved within 24 hours.
4) Fast delivery: Generally, we can delivery within 10 working days in factory after receiving the advance payment from customers.
6. How can you provide after-sales service to customers?
A: We will reply you at the first time and help you solve the problems within 24 hours. If we really need your local, we
We will send your professional person to your locality to help you solve the problems without any hesitation, supply you with all-round
