Shantui 07000-62018 O-ring gasket

Product Presentation

Materials and technical features

• High elasticity and compression resistance: The ring retains its shape and elasticity even after prolonged compression in the seat groove, without losing its tightness during vibrations and thermal expansion of the parts.

• Wide temperature range: The material operates effectively in conditions from -40 °C to +120 °C (for FKM - up to +200 °C), which allows the seal to be used in any climatic zones, from northern regions with extreme frosts to hot desert conditions.

• Chemical Resistance: The O-ring will not swell, decompose or degrade when in contact with motor oils, hydraulic fluids, diesel fuel, water and most aggressive chemical environments, which is critical for operation in lubrication, hydraulic and fuel systems.

• Mechanical strength: The material is resistant to abrasion, tearing and mechanical damage, which prevents ruptures and leaks during intensive use of the equipment.

Scope of application

• Hydraulic systemsThis is the primary application—sealing connections on hydraulic hoses, tubes, hydraulic cylinders, pumps, and valves. In these applications, the ring prevents hydraulic fluid leakage under high pressure (up to 30 MPa and above), which is critical for the stable operation of work equipment (blades, ripper, excavator buckets).

• Engine lubrication system: Sealing the joints in the cylinder block, oil pan, oil pump and filters, preventing engine oil leakage and dirt from entering the engine.

• Cooling systemSeals connections for the radiator, water pump, thermostat, and hoses, protecting against coolant leaks and engine overheating.

• Fuel system: Sealing fuel lines, injectors and fuel pump, preventing diesel fuel leakage and air from entering the system, ensuring stable engine operation and reducing the risk of fire.

• Pneumatic Systems: Sealing of joints in pneumatic brake systems and other units where tightness for compressed air is required.

Functional purpose

• Leak Prevention: Creates a reliable barrier seal that keeps the working fluid, oil or fuel inside the system, preventing loss and loss of operating efficiency.

• Protection from external pollution: Prevents dust, dirt, moisture and abrasive particles from entering the unit, which protects parts from corrosion, abrasive wear and premature failure.

• Compensation of deformations and vibrations: Due to its high elasticity, the ring compensates for thermal expansion and contraction of parts during operation, and also dampens vibrations, maintaining tightness even under intense impact loads.

• Reducing wear of adjacent parts: The seal prevents metal-to-metal contact between the connection surfaces, reducing friction and wear, extending the service life of shafts, flanges, housings and other components.

• Ensuring operational safety: Prevents hot oil, hydraulic fluid or fuel from leaking, reducing the risk of fire, operator injury and damage to expensive equipment components.

Advantages over non-original analogues

• Dimensional inaccuracyAnalogs often have variations in diameter and cross-section, leading to improper fit, distortion, and leaks after only a short period of use. The original Shantui 07000-62018 ring fully complies with specifications, guaranteeing a perfect fit without adjustment.

• Low quality materialNon-genuine seals often use cheap rubber without special additives, which quickly cracks, loses elasticity, and deteriorates when exposed to oils and high temperatures. Genuine Shantui material is designed specifically for the operating conditions of special equipment, ensuring a long service life.

• Lack of quality control: Analogs do not undergo multi-stage factory testing, which often leads to hidden defects and sudden leaks. Genuine Shantui parts are certified and come with an official warranty.

• High risk of costly repairs: Hydraulic fluid or oil leakage from a non-original seal can lead to failure of the hydraulic pump, engine or other expensive components, the repair cost of which is hundreds of times higher than the price of the original O-ring.

Installation and maintenance

1. Preparing the seatThoroughly clean the groove and mating surfaces of dirt, rust, and any old grease or sealant residue. Inspect the groove for burrs, scratches, or deformations that could damage the new ring.

2. Checking the sealBefore installation, inspect the O-ring for breaks, scratches, deformations, or other damage. Do not use damaged parts, as this will cause leaks.

3. LubricationLubricate the O-ring surface with a small amount of system fluid (hydraulic, engine oil) or a special seal lubricant. This facilitates installation, prevents damage to the ring during assembly, and improves sealing.

4. Installation: Carefully place the O-ring in place, making sure there is no distortion, twisting or stretching. Install the connection parts and tighten the fasteners to the torque recommended in the Shantui repair instructions.

5. Leak test: After assembling the unit, start the equipment and check the connection for any fluid leaks, making sure it is completely tight.

Conclusion

The Shantui 07000-62018 O-ring is a small but critical component that ensures the smooth operation of all heavy-duty equipment. Choosing a genuine part guarantees absolute tightness, protection against leaks and costly repairs, and an extended service life for the entire machine. For companies operating Shantui equipment, using genuine seals is an investment in reliability, safety, and a reduction in overall operating costs.

Exhibition cabinets

Getting to know the plant

The plant employs a team of highly qualified and experienced engineers who continuously implement technological innovations and improve its products. The company currently holds a number of independent intellectual property rights and patented technologies. Its construction equipment includes a wide range of excavators, loaders, cranes, bulldozers, and other machines. These products are distinguished by their high productivity, reliability, energy efficiency, and environmental friendliness, as well as the ability to adapt to challenging operating conditions in a variety of climates and work environments worldwide.

Awards and qualificationsfication

frequently asked questions

1. Which countries do we export to?

Asia: Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.

Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.

South America: Brazil, Chile, Paraguay, Argentina, etc.

Africa: South Africa, Ethiopia, Libya, etc.

2.What payment terms can we accept?

Usually we can work on T/T, 30% TT before production and 70% TT before shipment

3.What logistics methods can we use for delivery?

1) For most of Europe, South America and Africa etc. countries, we can go by container or Roro via ocean freight.

2) For China's neighboring countries, such as Russia, Vietnam, Kazakhstan, Uzbekistan, etc., we can deliver by road or rail.

3) For light spare parts in urgent requirement, we can ship it by international courier service, such as DHL, TNT, EMS or other air freight.

4. How can you guarantee that you have delivered the goods to customers?

A: We will provide you with full delivery information for you confirmed.

5.What are our advantages compared with other manufacturers/factories?

1) Reliable Quality: We carefully select long-term manufacturing partners to supply spare parts—such as engines, axles, and transmissions—and for the many components we design and manufacture ourselves, we consistently utilize the finest materials.

2) Competitive price: Concentration of mechanized production in large quantities reduces production costs to ensure competitive price.

3) Service Team: Our sales managers are available 24/7, ready to answer your questions at any time. Our professional technical support team, with senior technicians, is ready to provide support to users and dealers. Most issues can be resolved within 24 hours.

4) Fast delivery: Generally, we can delivery within 10 working days in factory after receiving the advance payment from customers.

6. How can you provide after-sales service to customers?

A: We will reply you at the first time and help you solve the problems within 24 hours. If we really need your local, we

We will send your professional person to your locality to help you solve the problems without any hesitation, supply you with all-round