Weichai 15049010V oil filter

Product representation

1. Technical characteristics

Article: 15049010V

Mark: Weichai Baudouin

Purpose: cleaning of motor oil in diesel engines

Type: spring filter with Replaceable Cartridge

Certification: ISO 4548-12, SAE J1858

2. Technical parameters

2.1. The main characteristics

Suitability for engines:

Weichai WP10/WP12 (10–12 liters, power 270–430 hp)

Baudouin M26.33/M26.35 (for ship and industrial installations)

Productivity: 15–25 l/min (depending on pressure).

Working pressure: 0.5–8 bar (maximum 10 bar).

The temperature range: -40 ° C (launch in the frost) up to +120 ° C (hot oil).

2.2. Cleaning parameters

Maximum efficiency: 99.5% (for particles ≥5 μm).

The maximum size of the retained particles: 100 microns.

Delay time: 0.3-0.5 seconds (at operating temperature).

2.3. Dimensional dimensions

Height: 285 mm

Diameter: 120 mm

Type of connection: RZBA M22x1.5 (corresponds to ISO 6149-1).

3. Design and materials

3.1. Composition and technology

Filter element:

Polypropylene membrane with micropority of 5-10 microns.

Aluminum mesh frame (to increase surface area).

Frame:

Power steel with anti -corrosion coating (zincing + epoxy paint).

A pen for easy removal/installation.

Seal:

Silicone rubber seal (resistant to oil and cold).

3.2. Special solutions

Anti -beet valve system:

Prevents the reverse flow of oil when the engine stops.

Opening speed: 0.1 seconds.

Pressure control system:

RelievE valve with an exceeding 8 bar.

Emergency output for non -filmed oil.

4. Technical advantages

4.1. High cleaning efficiency

Multidimensional cleaning:

Physical screening (membrane layer).

Electrostatic attraction (static field).

Reducing engine wear:

Removal of metal particles (up to 0.005 mm).

Resistance to lubricants (for example, ZDDP).

4.2. Durability and reliability

Test service life:

500 hours under load (corresponds to 150,000 km for trucks).

1000 cycles of temperature changes (-40 ° C → +120 ° C).

Tightness:

The density of the joints is checked under a pressure of 15 bar.

4.3. Economic operation

Energy efficiency:

Loss of pressure ≤0.5 bar (for non -filmed oil).

Environmental friendliness:

The possibility of regeneration (up to 3 times).

Reducing Co₂ emissions due to the stable operation of the engine.

5. Testing and certification

5.1. Laboratory tests

Wear test:

10,000 oil pollution cycles (ASTM D2068 standard).

Tightness test:

Pressure 15 bar for 1 hour (no leaks).

Climate tests:

Frost resistance: -40 ° C (response time 5 seconds).

Hot resistance: +150 ° C (24 hours).

5.2. Certification

ISO 4548-12: International standard for motor filters.

SAE J1858: USA (cleaning efficiency).

Tüv Rheinland: European quality certification.

6. Application and compatibility

6.1. The scope of application

Trucks: Volvo FH, Scania R-Series.

Construction equipment: Komatsu PC200, Caterpillar 320.

Ship equipment: engines for small and middle class ships.

6.2. Compatible materials

Oils: synthetic (0W-40, 5W-30) and mineral (15W-40).

Lubrication: Silicone-Based (for seals).

7. Instructions for installation and maintenance

7.1. Installation

Removing the old filter:

Disconnect the engine.

Determine the oil through the tile.

Develop the filter with a 22 mm key.

Installation of a new filter:

Cover the seal with oil.

Give the filter manually until it stops.

Tighten the key (moment 25-30 N · m).

7.2. Service

Replacement frequency:

15,000 km (for cars).

500 hours of work (for construction equipment).

Recommendations:

Use only certified Weichai filters.

Check tightness after each service.

Exhibition cabinets

Acquaintance with the plant

The plant operates a team of highly qualified and experienced engineers who continuously introduce technological innovations and improve products. Currently, the company has a number of independent intellectual property rights and patented technologies. The manufactured construction equipment includes a wide range of equipment such as excavators, loaders, taps, bulldozers and other machines. Products are highly productivity, reliability, energy efficiency and environmental friendliness, as well as the ability to adapt to difficult operating conditions in various climatic and working media around the world.

Awards and fightsFixation

frequently asked questions

1. In which countries are we exporting?

Asia: Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.

Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.

South America: Brazil, Chile, Paraguay, Argentina, etc.

Africa: South Africa, Ethiopia, Libya, etc.

2. What kind of payment conditions can we accept?

Usually we can work on T/T, 30% TT before production and 70% TT before shipping

3. What ways can we work for delivery?

1) for most countries in Europe, South America and Africa, etc. We can go along the container or Roro through the ocean freight.

2) for neighboring countries of China, such as Russia, Vietnam, Kazakhstan, Uzbekistan, etc. We can deliver by road or railway.

3) for light spare parts in the urgent requirement, we can send it using the international courier service, such as DHL, TNT, EMS or other air transportation.

4. How can you guarantee that you delivered goods to customers?

A: We will provide you with complete information about delivery for you.

5. What are our advantages compared to other manufacturers/factories?

1) Reliable quality: we carefully choose permanent manufacturers to support spare parts, such as engines, bridges, transmission, and many parts developed and produced by us always adapting the best materials.

2) a competitive price: the concentration of mechanized production in large quantities reduces production costs to ensure a competitive price.

3) The service team: firstly, our sales managers work 24 hours a day, are ready to answer your questions at any time. Secondly, a professional training team with senior equipment, ready to provide support services to users and dealers. Most problems can be solved within 24 hours.

4) Fast delivery: As a rule, we can deliver within 10 working days at the plant after receiving prepayment from customers.

6. How can you provide customers after sales service?

A: We will answer you at first and help you solve problems within 24 hours. If we really need your local, we

We will send your professional person to your settlement to help you solve problems without any fluctuations, supply you with comprehensive